Several recent construction disasters have placed a strong focus on the issues relating to Occupational Health and Safety (OHS) compliance in the industry. Solutions are needed to this ongoing challenge.
There are many facets of the construction sector that require private industry and government collaboration to see an improvement in unemployment rates as well as safety and sustainability for the industry. Two factors combining to significantly impact the sector are an increasing focus on compliance, coupled with a decreasing number of skilled artisans.
Gerhard Roets, of Gerhard Roets Health & Safety Specialists, says regulators, professional bodies, industry experts and specialist service providers need to collaborate to unpack the changing compliance landscape.
“Essentially, we need construction professionals to understand what is required, why it matters, and how to remain compliant without unnecessary cost or duplication. And we need to address the general state of the industry, and the important issues construction employers need to know about compliance,” notes Roets.
The non-compliance challenge
He explains that OHS is critical in this industry, but that non-compliance remains a major challenge, pointing to several recent construction disasters where this was a major factor.
“Perhaps the biggest driver of non-compliance is financial. Often, the small and medium enterprise (SME) contractors on a project hire people off the street, many of whom may be undocumented foreigners. They do this because they can pay these workers less, but at the same time they not only contravene many laws, but also risk lives and place workers on site in danger.”
“Such challenges affect the entire project and can even damage the reputation of the main contractor, as the investigation of any major accident leading to severe injury or death will impact construction deadlines, employee morale, and the company’s standing within the sector,” adds Roets.
Leading on from this, Frans Toua, CEO at TJEKA Training Matters suggests those construction firms that subcontract to SMEs need to ask whether the artisans working on their project have the necessary qualifications.
“We have increasingly fewer local artisans, as many are now reaching retirement age, so these SMEs often hire undocumented foreigners instead, creating another layer of challenge for OHS. At the same time, it must be remembered that as small businesses, these SMEs cannot afford to train new artisans – leaving as the obvious question: how will the industry replace the local artisans it is losing?”
“Since it is the main contractor that will face OHS compliance challenges in an instance where a sub-contractor’s employee doesn’t have the relevant certifications, my suggestion is for main contractors to instead take ownership of the issue by ‘adopting’ these SMEs and supporting them to train new artisans. This will benefit the main contractor from a compliance perspective, while adding skills to the industry as a whole,” he says.
Toua adds that funding a three-month skills programme, where the individual can walk away at the end with a certification, would be a great foundation for growing such skills development into something much larger.
New regulations
Warren Mallon, occupational health and safety specialist at the Department of Employment and Labour, advocates that employers should be aware that there are new OHS regulations that are updates on previous, outdated existing laws.
The new regulations have improved on strengthening the protection of employees and broadened the scope of employees protected, he indicates. Other key changes include the strengthening of exposure risk assessment requirements, exposure monitoring of hazards, medical screening and surveillance of employees and the implementation of control measures and the maintenance thereof.
“When it comes to ensuring compliance with these new laws, the first step is to read and understand the regulations and the requirements. Employers then need to identify which hazards they have at the workplace and adapt the generic nature of the regulations to fit the requirements to the specifics at the workplace, while incorporating the new requirements into existing OHS management systems,” he says.
Inspectors have already begun enforcing the new regulations as of September 2026, as employers were given an 18-month phase-in period, says Mallon.
“What employers should expect during an inspection is a documentation review of documents required by the regulations and a walk through of the premises. The walk-through will be to confirm that what have been indicated in the documentation, has been implemented,” he adds.
Looking ahead
Every year, the red-tape, compliance and stringent controls in this sector seem to put more emphasis on university degrees at the expense of artisans and skilled workers who have honed their trade over many years, suggests Joao Dos Santos, Archstone Construction operations director. This is translating into a workforce lacking in practical experience.
“There is great opportunity for our unemployment crisis in the skilled and semi-skilled job sector, but we need more emphasis placed on supporting the development of these skills rather than the compliance requirement to have formal tertiary qualifications,” he adds.
“It is vital that compliance and processes become more wholistic in supporting the trades. The development and support of local SMEs and entrepreneurship in this sector through strengthening of skills and recognition thereof through accredited programmes, is also vital.”
Roets notes that without a strong pipeline of developing artisans, the industry may soon lose these skills entirely. He believes that as more women enter the construction industry, they too can be trained up as artisans, creating a better and more diverse industry.
“Of course, bringing this full circle to OHS compliance, it is imperative that companies understand – when bringing women into the workforce – that effective OHS compliance means making specific provisions for women around issues like correctly designed personal protective equipment,” he says.
“Ultimately, success will be determined by those in the know to provide a better understanding of the new OHS regulations, a clearer understanding of the challenges the industry is facing, and to offer potential solutions for more effectively tackling these compliance issues.”




